New CNC XChange Feature — Enhanced Search and Replace for G Code Conversion

Version 20.0.0 of our CNC XChange – Fanuc / Haas <–> Okuma G code conversion software has been released.

Enhancements to this version include the ability to define multiple replace condiitons for a single line whne performing G code conversion. For example :

Replace : G83Z-1.000Q.100E.012

with : G74Z-1.000K.100F.012

This conversion can be set up in the CNC XChange User Options by simply defining the original code and replacement code using the * character like so :

Original Code : G83*Q*E*

Replacement Code : G74*K*F*

With the above we have defined G83 as the TRIGGER CODE … meaning whenever the software detects a G83 line it will perform the defined replacements … G83 to G74 … Q address to K address … E address to F address.

Unlike cryptic post processor language, the CNC XChange User Options use a simple code macro language that is far easier to understand, learn and implement … as the aboive demonstrates.

The CNC XChange User Options contain many other proven-over-the-years features that allow the user to set up complex G code conversions with little effort and no complicated coding type language. You can check out some of the other features through the link below :

https://www.kentechinc.com/Kipware_Manual/index.htm?context=770

For more information on CNC XChange … please visit https://kentechinc.com/cncxchange/

Kenney Skonieczny – President
Kentech Inc.