If you do a google search for “conversational cnc software” … one of the displayed option is for a product from CNCCookbook called G-Wizard Conversational CNC. OK then … if you’re taking up market space then you are fair game … so let’s see what it is.
Conversational CNC is part of the G-Wizard Editor package. The editor is a G code creation / editing / plotting application and the conversational “wizards” allow you to create snippets of G code to be inserted into the editor as you build a G code program. It truly is what I would call a “wizard” … quite limited in scope with only a very few simple operations available for G code generation. CNCCookbook touts that “conversational CNC is free during beta testing” … you can see why. The product hasn’t changed much in over two years and seems to be something that has lost the interest of the developer. However … as I stated above if you’re taking up market space … you are fair game for an honest and thorough review.
Here’s a quick video of our review of the TURNING wizards …
A couple of other annoying / unprofessional “features” :
(1) It outputs TONS of lines of code … most simply messages … but if your control has limited memory capacity … it’s an issue.
(2) There doesn’t appear to be any way to go back and edit code that was already created through a wizard … you have to start all over again in a new instance of the wizard. KipwareT® allows for complete recall into the conversational menu or direct edit of the cycle G code created.
(3) Roughing and finishing are always done … doesn’t seem to be any way to select ROUGH only or FINISH only … both are independently selectable in KipwareT.
Overall … the look and feel of G-Wizard conversational is that of a “wizard”. It will generate snippets of G code but is very limiting and without many options if you are trying to use it as a replacement for complex CAD/CAM for simpler workpieces … and there is no DXF import if the shape you are programming has some non-standard features.
Kenney Skonieczny – President